1. OVERVIEW

1.1    Product Introduction

MX804GW-D terminal devices are designed for fulfilling FTTH and triple play service demand of fixed network operators or cable operators. The box is based on the mature Gigabit GPON technology, which have high ratio of performance to price, and the technology of 802.11 ac/n Wi-Fi , Layer 2/3, and high quality VoIP as well. They are highly reliable and easy to maintain, with guaranteed QoS for different service. And It is fully compliant with technical regulations such as ITU-T G.984.x and technical requirement of GPON Equipment (V2.1 and above version) from China Telecom.

1.2    Network Mode

MX804GW-D is the FTTH mode terminal equipment which designed for indoor applications.

 

2. HARDWARE FEATURES 

2.1    Interface of device

 

 

MX804GW-D product figure as Picture 2-1

 

 

Picture 2-1

MX804GW-D

product figure

 

 

 

 

Table 2-1 Description MX804GW-D equipment Interface

Port Type	Function
FXS port	Connect the telephone with FXS port by telephone wire
LAN 1~4 port	RJ45 Port connects to local internet,4 GE port
Reset button (RST)	Press down reset button and keep 5 seconds to make the device restart and recover from the factory default Settings.
WPS button (WPS)	WPS: Press for 3 seconds and press the WPS button of other Wi-Fi devices within 2 minutes to start standard WPS negotiation.
PWR port (DC12 V)	Connect with power adapter
Power turn on/off	Power turn on/off

 

 

 

2.2    Indicators of device

 

Indicators	status	Description
POWER	Light on	ONU power supply normally
	Light off	ONU no power supply
	Blink	Enable WPS function
PON	Light on	ONU link active
	Blink	ONU manage to link
	Light off	ONU receiving   power   rate   lower   than   optical receiver sensitivity
LOS	Blink (Red)	Device does not receive optical signals.
	Light off	Device has received optical signal.
INTERNET	Light on	Internet is effective.
	Light off	internet is ineffective.
LAN1~4	Light on	network port linked, but no data transmitting
	Blink	network port data pass
	Light off	The ONU is not powered on or the network cable is disconnected
WIFI	Light on	Wi-Fi turn on
	Light off	Device is power off or Wi-Fi turn off
	Blink	Wi-Fi turn on and with ongoing data transmission
FXS	Light off	VOIP account is not used
	Every 1s blink	SIP server is not registered
	Light on	Registered to the SIP server and can be used
	Every 0.25s blink	Send and receive voice data

 

 

3. TECHNICAL SPECIFICATIONS 

3.1    Physical structure, Environment and Electrical parameter

 

Table 3-1 MX804GW-D specification and working environment

 

Parameter	Nominal
Dimension	176mm×112mm×31mm（L×W×H）
Net weight	0.35kg
Typical power consumption	<12W
Noise	None
Cooling style	Naturally cooling
Power supply	12V DC（By external AC/DC adapter）
Installation style	Support PC, wall mount or put inside of information box.
Environment	-5~50℃
Atmospheric pressure	70~106Kpa
MTBF	50,000hours@25℃
MTTR	30minutes

 

3.2    GPON Interface Specifications

 

Table 3-2 MX804GW-D GPON Interface

 

Parameter	Nominal
Connector style	SC/APC
PON quantity	1
Fiber style	Single mode
Wavelength	TX：1310 +/-20nm RX：1490 +/-10nm
PON interface standard	ITU-T G.984.2/ITU-T G.984.3/ITU-TG.988 Class B+
PON interface receiving rate	2.488Gpbs
PON interface transmitting rate	1.244Gpbs
Output optical power	Min: 0.5dBm              Max: +5dBm
Opticalreceiver sensitivity	Precede -28dBm
The length of the optical link	Max 20km

 

 

3.3    Wi-Fi Specifications

 

Table 3-3 MX804GW-D Wi-Fi Specifications

 

Standard		IEEE 802.11 ac/b/g/n
Wi-Fi Parameter	Frequency	2.4~2.4835GHz 5GHz： Low frequency        5.15GHz～5.25GHz、 Middle frequency 5.25GHz～5.35GHz、 High frequency        5.725GHz～5.825GHz
	Transmission speed	2.4GHz Frequency: IEEE 802.11b ：11/5.5/2/1M(Auto) IEEE 802.11g：54/48/36/24/18/12/9/6(Auto) IEEE 802.11n：270/243/216/162/108/81/54/27Mbps,up to 300Mbps
		5GHz Frequency: IEEE 802.11n：Highest transmission speed up to 300Mbps IEEE 802.11ac ：Highest transmission speed up to 867Mbps
	Channel number	2.4GHz ：13         5GHz：4
	Spread-spectrum Technique	DSSS(Direct sequence spread spectrum)
	Data Modulation	DBPSK、DQPSK、CCK and OFDM(BPSK/QPSK/16-QAM/64-QAM)
	Sensitivity@PER (Package error rate)	270M：-68dBm@10% PER；130M： -68dBm@10% PER； 108M：-68dBm@10% PER；54M：-68dBm@10% PER 11M：-85dBm@8% PER；6M：-88dBm@10% PER 1M：-90dBm@8% PER；
	Transmission distance	Indoor Maximum 120 meters；Outdoor Maximum 360 meters(The distance depends on the environment)

 

 

 

 

3.4    POTS Specifications

 

support SIP voice protocol support H.248 voice protocol

SIP protocol: ISP provide the port number of the main SIP proxy server and terminal VO

Value range is 1-65535, system default value is 5060

H.248 protocol: ISP provide port number of the spare MGC server and VOIP terminal Value range is 1~65535, system default value is 2944

Port ringing current voltage: 50±10VAC，30±10H Port type POTS(VOIP)

Support G.711 A-Law/u-Law,G729A/B,G.723.1-5.3/6.3,G.726.etc.voice coding/comp

technology

 

3.5    Special function

 

Support TR069,NAT,DMZ,DNS features Support Multiple ssid

Support MU-MIMO

Support Easy-Mesh(optional) Support Multiple VLAN

Support IPV6 ,PPPoE, DHCP and Static IP configuration for WAN Interface

Support IP, MAC filtering, Firewall Functionality in routed mode Support for XPON, adaptive EPON or GPON OLT on the network