1. OVERVIEW 

1.1    Product   Positioning

 

MX801GC terminal devices are designed for fulfilling FTTH and triple play service demand of fixed network operators or cable operators. The box is based on the mature Gigabit GPON technology, which have high ratio of performance to price.They are highly reliable and easy management and guaranteed QoS. And It is fully compliant with technical regulations such as ITU-T G.984.x and technical requirement of GPON equipment (V2.1 and above version) from China Telecom.

 

1.2    Network Mode

 

MX801GC is the FTTH mode terminal equipment which designed for indoor applications.

 

2. HARDWARE FEATURE 

2.1    Interface of device

 

MX801GC product figure as Picture 2-1

 

Picture 2-1 MX801GC product figure

 

 

Table 2-1 Description MX801GC equipment Interface

Port Type	Function
PON port	Connect PON port with internet by SC type, single mode optical fiber cable
LAN    port	RJ45Port connects to local internet, 1 GE port automatically
Reset button (RST)	Press down reset button and keep 1-5 seconds to make the device restart and recover from the factory default Settings.
PWR port (DC12 V)	Connect with power adapter
Power turn on/off	Power turn on/off

 

2.2    Indicators of device

 

Table 2-2 MX801GC LED statement

 

Indicators	status	Description
POWER	Light on	ONU power supply normally
	Light off	ONU no power supply
PON	Light on	ONU link active
	Flash	ONU manage to link

 

	Light off	ONU receiving   power   rate   lower   than   optical receiver sensitivity
LOS	Blink	Device does not receive optical signals.
	off	Device has received optical signal.
LAN	Light on	network port linked, but no data transmitting
	Flash	network port data pass
	Light off	ONU no power supply or internet cable unlink

 

 

3. TECHNICAL SPECIFICATIONS 

3.1    Physical structure, Environment and Electrical parameter

 

Table 3-1 MX801GC specification and working environment

 

Parameter	Nominal
Dimension	107mm×85mm×26mm（L×W×H ）
Net weight	0.26kg
Typical power consumption	<7W
Noise	None
Cooling style	Naturally cooling
Power supply	12V DC (By external AC/DC adapter）
Installation style	Support PC, wall mount or put inside of information box.
Environment	0~45℃
Atmospheric pressure	70~106Kpa
MTBF	50,000 hours
MTTR	30 minutes
Parameter	Nominal

 

3.2    GPON Interface Specifications

 

Table 3-2 MX801GC GPON Interface

 

Parameter	Nominal
Connector style	SC/PC
PON quantity	1
Fiber style	Single mode
Wavelength	TX：1310 +/-20nm RX：1490 +/-10nm
PON interface standard	ITU-T G.984.2/ITU-T G.984.3/ITU-TG.988 Class B+
PON interface receiving rate	1.244Gpbs

 

 

PON interface transmitting rate	2.488Gpbs
Output optical power	Min: 0dBm              Max: +5dBm
Optical receiver sensitivity	Precede -28dBm
The length of the optical link	Max 20km

 

 

 

3.3    CATV optical receiver specifications

 

Table 3-3 CATV Optical receiver parameter

 

Item			Unit	Parameter
Optical parameter	Receivingoptical wavelength		nm	1200～1650
	Receiving optical power		dBm	-18～+0
	Reflection loss		dB	≥50
	Connector		–	SC/APC
	Fiber type		–	Single mode
	Isolation (WDM)	Forward channel	dB	≥40
		Reflection channel	dB	≥22
RF parameter	Frequency		MHz	47 ～ 1000
	In-band flatness		dB	±1
	Output reflection loss		dB	≥14
	Nominal output level		dBuV	=75±1    （AGC range：-15～ -2dBm）
	Attenuation range		dB	-18~0
	C/N		dB	≥ 46
	C/CTB		dB	≥ 65
	C/CSO		dB	≥ 65
	Output impedance		Ω	75
Others	Power supply（DC）		V	5
	Power consumption		W	≤1.5
	Working temperature Storage temperature		℃ ℃	0 ～ +45
				-40～ +75
	Relative humidity		%	Maximum 95%   non-condensing

 

 

 

 

 

3.4   Special   function

 

 

Ø	Support TR069, NAT, DMZ, DNS features
Ø	Support IGMP multicast and using bandwidth efficiently.
Ø	Support Multiple VLAN
Ø	Support network storm control.
Ø	Support IPV6, PPPoE, DHCP and Static IP configuration for WAN Interface
Ø     .	Support IP, MAC filtering, Firewall Functionality in routed mode